u.s. cage code 06324 www.glenair.com e-mail: sales@glenair.com 22 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. vg95234 connectors vg95234 b1 and vg95234 b2 rear panel wall mount receptacle with threaded (b1) and thru-holes (b2) vg95234 b2 ?a d1 d2 e l4 l1 l2 l3 d2 alternate insert positions n - x - y basic part number contact arrangement p - pin contacts s - socket contacts rear panel mount receptacle with... b1 - threaded holes b2 - thru holes 1 - standard awg contacts (omit for metric) vg95234 b1 32-6 s 1 n application notes 1. rear panel mount square ange receptacle?no accessory threads. threaded or through mounting holes. 2. standard crimp contact material consists of copper alloy with silver plating. please see pages 16-17 for additional contact information. 3. insert arrangements iaw vg95234. please see pages 10-15. 4. standard insert is synthetic rubber, oil and low temperature resistant (-55c to +125c) iaw mil-r-3065. 5. stainless steel and marine bronze shells are available in series its products. please consult factory. 6. all dimensions are metric unless otherwise noted.
u.s. cage code 06324 www.glenair.com e-mail: sales@glenair.com 23 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. vg95234 connectors vg95234 b1 and vg95234 b2 rear panel wall mount receptacle with threaded (b1) and thru-holes (b2) dimensions shell size ?a +0 -0.15 d1 max d2 e 0.1 l1 0.3 l2 +0.4 -0 l3 0.2 l4 0.3 weight gr. max b1 b2 h13 10 sl 18.2 16.2 m4 3.2 18.2 24.7 18.2 2.8 25.4 14 14 s 24.6 19.2 m4 3.2 23.0 24.7 18.2 3.2 30.0 21 16 s 27.4 22.4 m4 3.2 24.6 24.7 18.2 3.2 32.5 22 16 27.4 22.4 m4 3.2 24.6 33.8 23.05 3.2 32.5 27 18 30.8 25.6 m4 3.2 27.0 33.8 23.05 4.0 35.0 33 20 34.2 29.0 m4 3.2 29.4 33.8 23.05 4.0 38.0 37 22 37.4 32.2 m4 3.2 31.8 33.8 23.05 4.0 41.0 42 24 40.9 35.3 m4 3.7 35.9 33.8 23.05 4.0 44.5 48 28 46.7 41.4 m5 3.7 39.7 33.8 24.05 4.0 50.8 58 32 53.4 47.8 m5 4.3 44.5 33.8 24.05 4.0 57.0 72 36 59.6 54.1 m5 4.3 49.2 33.8 24.05 4.0 63.5 84 materials shells inserts (temperature range) aluminum alloy iaw qq-a-591 shells high insulation synthetic rubber -55c/+125c crimp contacts copper alloy with silver plating over nickel standard finish (for qq-a-591 aluminum shells) requirements cadmium with olive drab passivation iaw qq-p-416 thermal shock -55c + 125c salt spray after thermal shock 500 hour electrical conductivity very good abrasion resistance very good
|
